Our Location
304 North Cardinal St.
Dorchester Center, MA 02124
How to repair a small ground drilling machine that does not rotate?
When the small ground drill doesn’t turn, you can follow these steps to repair it:
Check the power supply:
Make sure the power plug is plugged in tightly and the power outlet has power.
Check the power cord for damage or aging, and replace it with a new one if necessary.
Check whether the power switch is turned on.
Check the motor:
Listen for any abnormal noise from the motor and observe whether it is heating or burning.
If the motor is damaged, you need to contact professional maintenance personnel or purchase a new motor for replacement.
Check the drive system:
Check whether the transmission system (such as reducer, coupling, drilling head, etc.) is loose or damaged.
If there is a problem with the transmission system, the corresponding parts need to be tightened or replaced.
Check for faulty sensors:
If the drill is equipped with fault sensors, check that they are working properly.
If the sensor is damaged or malfunctions, you need to contact professional maintenance personnel or purchase a new sensor for replacement.
Check the circuit:
If none of the above steps resolve the issue, there may be a faulty circuit.
Circuit faults usually require professional troubleshooting and repair, so it is recommended to contact professional maintenance personnel.
Cleaning and Maintenance:
Clean the inside of the drilling machine from dust and debris and make sure the inside of the machine is clean.
Lubricate and maintain your drilling machine regularly to extend its service life.
Safe operation:
When performing servicing, make sure the power is turned off and the power plug is disconnected to avoid the risk of electric shock.
Use appropriate tools and equipment for repairs, and do not disassemble or modify machine parts at will.
Please note that if you are unfamiliar with maintenance operations or are not sure how to perform them, please contact professional maintenance personnel or relevant after-sales service agencies. They will be able to provide professional advice and assistance to ensure your small ground drill is repaired correctly.
Very fantastic info can be found on blog.